Klipsch RP-250C vs. RP-500C: Which Is The Better Speaker? 

Klipsch has been famous for its high-quality speakers. However, their products are not all the same. In this article, we will compare and contrast Klipsch RP-250C vs. RP-500C. Let’s join us and determine the superior item! 

Read more: Denon AVR-S750H Vs. Yamaha TSR-700

Klipsch RP-250C vs. RP-500C Comparison

Klipsch RP-250C vs. RP-500C
Klipsch RP-250C

The 250C is a passive (non-powered) channel speaker that produces crystal-clean sound. It can deliver lifelike sound to enrich your movie and music experience.

Klipsch RP-250C vs. RP-500C
Klipsch RP-500C

The 500C is an upgraded version of the 250C. Hence, you can expect some differences between the two models. 

Similarities

Since the speakers come from the same brand, they have a lot of features in common, such as:

  • Impedance 

Every speaker has an impedance rating measured in ohms, which indicates how hard it is to operate the speaker. The lower the rate, the more smoothly the electric signal can pass through the device. 

Both of these Klipsch have an 8-ohm impedance rating. This value is considered “good” for a speaker to function properly. 

You can check this video and discover how an 8-ohm speaker works:

  • Tweeter

The unique Linear Travel Suspension (LTS) reduces distortion for a more precise, better performance. LTS tweeters are the brand’s trademark, and you can find them in the two speakers. 

Moreover, these models both have vented tweeter housings, which decrease standing waves and unpleasant overtones. This function improves the clarity and richness of high-frequency reproduction.

  • Frequency range

The speakers can work with a frequency ranging from 60Hz to 25kHz. This wide range allows them to deliver sound accurately. 

Differences

If you are not a professional, it’s hard to tell the difference in sound between the two speakers. These models differ in their weight, power handling, and price.

  • Weight

The newer model is slightly heavier than its previous version. Its lighter weight makes it possible to mount and install on the shelf. 

  • Power handling

The speaker’s mean power, also called root mean square (RMS) power handling, is the volume of continuous power it can manage. 

The most significant power output that the device can use in brief bursts is referred to as the peak power management rating.

The 250C is better at handling power with its peak, and RMS is 500W and 125W, respectively. Yet, the difference doesn’t lead to much change in sound output.  

  • Price

The 500C is about $100 more expensive than its competitor despite their equal sound quality. 

 The two models have a few slight differences
The two models have a few slight differences

Comparison table

We have compared the two models in essential terms. Now, let’s summarize their differences. 

Criteria  Klipsch RP-250C Klipsch RP-500C
Weight 18.41 pounds 18.08 pounds
Impedance  8 ohms 8 ohms
Woofer size 5.25″ 5.25″
Number of drivers 3 3
Power handling    Peak: 500W

RMS: 125W

Peak: 400W

RMS: 100W

Frequency 60Hz to 25kHz 60Hz to 25kHz
Sensitivity  96dB 96dB
Price  Cheaper More expensive

Klipsch RP-250C vs. RP-500C – What Should You Choose?

Large woofers in these speakers ensure precise sound reproduction. They also have excellent build quality. 

These products are similar in many aspects. You can choose any of them for your home setup. Here are some cases where one is better than the other. 

When to choose an RP-250C? 

Klipsch RP-250C vs. RP-500C
Klipsch RP-250C

Although the 250C is a budget model, it produces significant power. Hence, it should be able to handle continuous use and work all day.

The best thing is that it can cover a vast room with a strong sound and blend well with most interior décor.

When to choose an RP-500C? 

Klipsch RP-250C vs. RP-500C
Klipsch RP-500C

The 500C, on the other hand, delivers a beautiful combination of low and high frequencies, boosting your audio experience.

Additionally, this speaker is user-friendly and features the newest techniques to enhance efficiency and its attractive design.

Read also: Klipsch SPL-120 Vs. R-120sw

Conclusion

The difference in sound produced by a Klipsch 250C and 500C is minimal. They both can create crisp and accurate sounds. The power handling, weight, and price make them different from each other. 

Hopefully, you will find this article helpful. If you need further information about your purchase, please feel free to ask. Thank you for reading!

5/5 - (1 vote)

We will be happy to hear your thoughts

Leave a reply

Omghowto - Tutorials Related To Technology, Windows, Mac, iOS & Android
Logo